.
Aucune description promotionnelle n’est disponible.
HPE Aruba AP-515 (RW) – borne d’accès sans fil – Bluetooth, Wi-Fi 6
12.741,17 Dhs 20.426,17 Dhs
MPN | Q9H62A |
---|---|
Marque | Aruba |
Gamme de produits | HPE Aruba |
Modèle | AP-515 (RW) |
Fabricant | Aruba |
Optical Drive Type | Aucun |
Conforme aux normes | 1, 3, CE/EMC, Directive 2014/30/EU, Directive 2014/35/EU, Directive 2014/53/EU, EN 60601-1-1, EN60601-1-2, ETS 300 019 Class 1, ETS 300 019 Class 2, FCC, IEC/EN/UL 60950, ISED, UL 2043 |
Technologie de connectivité | Sans fil |
Data Link Protocols | Bluetooth 5.0, IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax (Wi-Fi 6), IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
Débit de transfert de données | 4, 8 Gbits/s |
Fonctionnalités | 4×4 MU-MIMO technology, Adaptive Radio Management (ARM), Advanced Cellular Coexistence (ACC), Air Monitor (AM), AppRF technology, Aruba AirMatch, ClientMatch, Custom deep-sleep mode, Cyclic Delay Diversity (CDD), Cyclic shift diversity (CSD), Direct Sequence Spread Spectrum (DSSS), Dynamic Frequency Selection (DFS), High Efficiency (HE) support, High-Throughput (HT) support, Intelligent Power Monitoring (IPM), LACP support, LED off mode, Low Density Parity Check (LDPC), Maximum Ratio Combining (MRC), MU-MIMO technology, Orthogonal Frequency Division Multiple Access (OFDMA), Orthogonal Frequency Division Multiplexing (OFDM), Packet aggregation A-MPDU, Packet aggregation A-MicrosoftDU, Secure Core Technology (SCT), Space Time Blocking Code (STBC), Spectrum analyzer, Target Wait Time (TWT), Transmit Beam-forming (TxBF) ready, Trusted Platform Module (TPM), Unified AP support, Very High Throughput (VHT) support |
Facteur de forme | Intégré au plafond |
Bande réseau | 2, 4 GHz, 5 GHz |
Power Over Ethernet (PoE) | PoE |
Type de produit | Point d'accès sans fil |
Méthode d'étalement de spectre | DSSS, OFDM |
Indicateurs d'état | Status, System |
LAN sans fil | 802.11a/b/g/n/ac/ax, Bluetooth 5.0 |
Interface prévue | 1 x 1000Base-T – RJ-45, 1 x console – micro-USB, 1 x HPE Smart Rate – RJ-45, 1 x USB 2.0 – Type A |
Consomm. d'énergie de fonctionnement | 16 watts |
Facteur de forme de l'antenne | Interne |
Niveau de grain de l'antenne | 5 DBi, 7 |
Antennes | 4 |
Directivité | Omni-directionnel |
Chiffrement | WPA, WPA2, WPA3 |
Compatible Internet des objets (IdO) | Oui |
Format de ligne de codage | OFDMA, 1024 QAM, 16 QAM, 256 QAM, 64 QAM, BPSK, CCK, OFDM, QPSK |
Température d'exploitation maximale | 50 degrés Celsius |
Température d'exploitation minimale | 0 degrés Celsius |
MTBF | 64 an |
Humidité de fonctionnement | 5 – 93 % (sans condensation) |
Operating System Required | ArubaOS, InstantOS |
Capacité | BSSID par radio: 16, OFDMA units: 16, Wireless clients per Wi-Fi radio: 256 |
IoT Communications Technology | Bluetooth, Zigbee |
Quantité livrée | 1 |
Conception renforcée | Intérieur |
Activation de service | Non |
Network Device | 4 Gbps, 4 GHz): 575 Mbps, 8 Gbits/s, Aggregate bandwidth: 5, Maximum data rate (2, Maximum data rate (5 GHz): 4 |
Hauteur | 6 centimètres, 4 |
Poids | 810 grammes |
Largeur | 20 centimètres |
Profondeur | 20 centimètres |
Catégorie couleur | Blanc |
Certifié ENERGY STAR® | Non |
Conforme à EPEAT | Non |
Certifié TCO | Non |
Détails du service et du support | Garantie limitée – durée de vie |
Garantie limitée | Limited Lifetime |
Based on 0 reviews
Be the first to review “HPE Aruba AP-515 (RW) – borne d’accès sans fil – Bluetooth, Wi-Fi 6”
You must be logged in to post a review.
There are no reviews yet.